Australia vs Canada: Land Area, Population, and Settlement Patterns

Short Answer

Canada is larger and more populous than Australia in the latest comparison figures, but both are vast and sparsely settled. Canada reports about 41.7 million people and Australia about 27.6 million, with densities near four people per square kilometre. Most people in both countries live in urban areas, but settlement is concentrated in very different physical environments.

Canada and Australia are often grouped together as large, wealthy, English-speaking federations, but their settlement maps are not scaled copies of one another. Canada has the larger reported territory and the larger population; Australia has the smaller territory and, on the comparison figures used here, the lower average population density. The more revealing difference is where people live: both countries leave most of their land very lightly settled, but they do so for different physical reasons and with different urban geographies.

Area: Canada is larger, but “land area” needs a definition

Geography Worlds describes Canada as the second-largest country in the world by total area, behind Russia, and Australia as sixth. Its comparison puts Canada at about 9.98 million square kilometres and Australia at about 7.69 million square kilometres of total area [2]. The WorldData country comparison gives more precise-looking area values of 7,741,220 km² for Australia and 9,984,670 km² for Canada [1]. The two sets are close enough to support the same broad conclusion: Canada’s national territory is larger by roughly 2.2–2.3 million km².

The exact figure depends on what is being counted. “Total area” can include inland water, while “land area” excludes some or all of that water. The sources used here do not provide a complete, matched land-only pair for both countries, so the safest statement is that Canada is clearly larger in reported territorial area; a land-only ranking should be checked against a single dataset that publishes both definitions. Geography Worlds notes that Canada’s Arctic archipelago accounts for much of its extra area [2], which is a reminder that the difference is not simply a longer east–west span of settled country.

Population: a larger Canadian total, similar sparseness

WorldData reports 41,652,000 people in Canada and 27,614,000 in Australia in its latest available country comparison [1]. Geography Worlds rounds the same contrast to about 41 million and 27 million [2]. The Canadian total is therefore larger by roughly 14 million people. That is a substantial difference in absolute terms, but it is small relative to the two countries’ combined territory.

The same comparison reports 4.2 inhabitants per square kilometre in Canada and 3.6 in Australia [1]. Geography Worlds summarizes both as being among the emptiest countries on Earth, at around four people per square kilometre [2]. These are national averages, not descriptions of everyday experience. They divide the whole population by the whole reported area, including deserts, forests, tundra, mountains, and other places where very few people live. A country can have a very low national density and still have crowded metropolitan regions.

The arithmetic is simple enough to check. Using the WorldData figures, Canada’s density is about 41,652,000 ÷ 9,984,670 ≈ 4.17 people per km², and Australia’s is about 27,614,000 ÷ 7,741,220 ≈ 3.57 people per km² [1]. If the denominator were land area rather than total area, both densities would rise, but the broad comparison would remain one of very low average density.

Table 1. Selected reported comparisons from the WorldData country comparison. Values are latest available figures on the cited page, accessed 16 November 2026; the page does not present a single common census year for every row.
IndicatorAustraliaCanada
Reported area (km²)7,741,2209,984,670
Population27,614,00041,652,000
Inhabitants per km²3.64.2
Urban population share87.7%82.9%

Source: WorldData country comparison [1]. The density row is population divided by the reported area shown. The table uses one source for all four rows so that the density figures are internally consistent with the population and area values shown.

Definitions: density, urbanization, and settlement pattern

Population density is the number of people divided by a given area. It is an average, and it says nothing directly about how crowded a city street or a rural district feels. Urbanization is the share of a population living in areas classified as urban; the threshold and method vary by country, so the Australian and Canadian percentages are best read as broad indicators. A settlement pattern is the distribution of population across a territory—where cities, towns, farms, resource settlements, and sparsely populated regions are located. These three measures explain why Canada and Australia can be both sparsely populated and highly urbanized at the same time.

Settlement patterns: coastal Australia, southern Canada

The urbanization figures point to a shared feature: both countries are overwhelmingly urban in their settlement habits. WorldData reports that 87.7% of Australia’s population and 82.9% of Canada’s population are urban [1]. “Urban” is defined differently from one statistical system to another, so the two percentages are best used as broad indicators rather than precise equivalents. They still show that the typical resident of either country lives in a town or city, not on a remote farm or in a wilderness homestead.

In Australia, the settled pattern is strongly coastal and near-coastal. The interior is largely arid or semi-arid, and the major population centres are concentrated in the better-watered and climatically milder coastal regions. That is a generalization, but it follows from the physical geography summarized by Geography Worlds: most of Australia is desert [2]. The result is a country that is continental in size but whose populated ecumene is much narrower than its outline suggests.

Canada’s pattern is different but equally uneven. Much of the country is cold for a large part of the year, and Geography Worlds notes that most of Canada is frozen for half the year [2]. The population and transport network are therefore concentrated in the south, especially in regions with milder winters and easier connections to the rest of North America. The northern territories and much of the boreal and Arctic zone are very sparsely settled. The comparative demography literature makes the same point more formally: Australia and Canada are both very large countries with extensive areas of very low settlement [4].

In both countries, rural settlement is not a single uniform category. It includes agricultural districts, resource towns, remote Indigenous communities, and areas used periodically for work or recreation. National averages cannot capture that variety, which is why a settlement-pattern map is often more informative than a single density number.

Why the settlement maps look so different

The key contrast is not “empty versus full” but “differently constrained.” Australia’s interior is limited by aridity and water availability; Canada’s north is limited by cold, permafrost, and distance from markets and services. Both countries have resource economies and widely spaced settlements, but the habitable or economically accessible belt is arranged differently. In Australia, the sea and coastal lowlands pull settlement toward the continental edge. In Canada, the southern border zone pulls settlement toward the continental south.

This helps explain why national density can be misleading in both cases. A density of 3.6 or 4.2 people per square kilometre does not mean that people are evenly spread at that rate. It means that a small share of the territory carries most of the population, while large areas carry very few residents. The same arithmetic can describe a country of coastal cities and a country of southern metropolitan corridors, even though the maps look quite different.

Reading the comparison correctly

Three cautions matter. First, area and land area are not always the same measure; total area may include inland water, and different datasets may treat coastal water, lakes, and reservoirs differently. Second, population figures may be estimates, projections, or census-based counts, and the comparison page may combine values from different reference dates. Third, “urban” is a statistical category, not a moral or lifestyle label, and its threshold varies by country.

For a quick comparison, the safest conclusions are modest: Canada is larger than Australia in reported territorial area; Canada has the larger population; both have very low national population densities; and both are highly urbanized, with settlement concentrated in climatically and economically accessible regions. Anything more precise—such as a claim about the share of each country that is “habitable” or “settled”—requires a separate dataset with an explicit definition.

FAQ

Is Canada bigger than Australia?

Yes, in reported total area. Geography Worlds gives Canada about 9.98 million km² and Australia about 7.69 million km²; WorldData lists 9,984,670 km² and 7,741,220 km². The broad ranking is robust, though exact values depend on area definitions. [1][2]

Is Canada more densely populated than Australia?

Slightly, on the WorldData averages: Canada has 4.2 people per km² and Australia 3.6. Both figures are very low because they divide population by the whole reported territory, not just habitable or built-up land. [1]

Why are Canada and Australia so sparsely populated?

Physical geography limits settlement in both countries. Much of Australia is arid or semi-arid, while much of Canada is cold for a large part of the year. Both therefore have extensive areas of very low settlement. [2][4]

Does low population density mean most people live in rural areas?

No. Both countries are highly urbanized: WorldData reports 87.7% urban in Australia and 82.9% in Canada. A low national density can coexist with concentrated urban populations. [1]

Can I compare land area directly from these figures?

Only if both figures use the same definition. Total area may include inland water, while land area may not. The Canada–Australia ranking is clear, but exact land-only values need a matched dataset. [1][2]

References

  1. [1] WorldData.info. Country comparison: Australia / Canada. Latest available figures, accessed November 16, 2026. https://www.worlddata.info/country-comparison.php?country1=AUS&country2=CAN
  2. [2] Geography Worlds. Australia vs Canada: Size, Population & Geography Compared. Updated October 22, 2026. https://geographyworlds.com/blog/australia-vs-canada-comparison/
  3. [4] Beaujot, Roderic, and Peter McDonald. Comparative Demography of Canada and Australia. Canadian Studies in Population 43, no. 1–2 (2016): 1–4. https://doi.org/10.25336/p6gg6f

Related Terms

Leave a Reply

Your email address will not be published. Required fields are marked *

Browse more of Country Facts